Asante EtherPaC 2000+ Series Installationsanleitung Seite 48

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 55
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 47
Page 5-2
Remote Boot ROM
Booting Your PC From a Server
You may want to boot up your PC from a remote server on the network. Or
you may have a PC without a boot diskette or a disk drive and need to boot
it up from a remote server.
To boot the PC from a server, you need to:
Install the remote boot ROM on the EtherPaC 2000+
adapter
Install Novell NetWare software on the network
Prepare the PC
Prepare the server
The Boot ROM allows you to load the PC operating system over the net-
work. This chapter provides instructions for the steps required.
Installing the Boot ROM
You install the Boot ROM in the ROM socket of the EtherPaC 2000+ adapter.
1
If the EtherPaC 2000+ is installed in the PC and connected to the
network, turn off the PC, then disconnect and remove the
adapter.
2
Take the Boot ROM out of its protective packaging.
3
Check all pins on the ROM to make sure none are bent.
4
Locate the socket for the Boot ROM on the adapter.
Seitenansicht 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55

Kommentare zu diesen Handbüchern

Keine Kommentare